seachem prime

[delta66]

Αρχική Δημοσίευση από kgf12345

αν δεν το εχεις δει, δες'το εδω.τα βασικα του πλεονεκτηματα υπογραμμισμενα.παραθετω απτο site της seachem:

"Why It's Different
Nearly all companies manufacture a product that removes chlorine. None of those, however, can compare in quality, concentration, or effectiveness to Seachemʼs flagship product: Prime®. Prime® is the second most concentrated dechlorinator on the market after our own aquavitro alpha™. A single 100 mL bottle will treat 1000 US gallons of tap water. Prime® will remove both chlorine and chloramines from municipal water supplies.

Prime® also contains a binder which renders ammonia, nitrite, and nitrate non-toxic. It is very important to understand how those two functions work together. All dechlorinators operate through a chemical process known as reduction. In this process, toxic dissolved chlorine gas (Cl2) is converted into non-toxic chloride ions (Cl-). The reduction process also breaks the bonds between chlorine and nitrogen atoms in the chloramine molecule (NH2Cl), freeing the chlorine atoms and replacing them with hydrogen (H) to create ammonia (NH3).
Typically, dechlorinators stop there, leaving an aquarium full of toxic ammonia! Seachem takes the necessary next step by including an ammonia binder to detoxify the ammonia produced in the reduction process.

Be very careful when purchasing water conditioners. If your municipality includes chloramines in the water supplies, a standard sodium thiosulfate dechlorinator is not enough. Prime® promotes the natural production and restoration of the slime coat rather than relying on artificial or non-native slime compounds. A further bonus for the reef hobbyist—Prime® will not overactivate protein skimmers.

Directions
Use 1 capful (5 mL) for each 200 L (50 gallons*) of new water. This removes approximately 1 mg/L ammonia, 4 mg/L chloramine, or 5 mg/L chlorine. For smaller doses, please note each cap thread is approx. 1 mL. May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose."

Υ.Γ ελπιζω να μην παραβιαζω κανενα κανονα του φορουμ τωρα

Επισης σημαντικα τα FAQs

Q: I am using Prime® to control ammonia but my test kit says it is not doing anything, in fact it looks like it added ammonia! What is going on?

A: A Nessler based kit will not read ammonia properly if you are using Prime®... it will look "off scale", sort of a muddy brown (incidentally a Nessler kit will not work with any other products similar to Prime&#174. A salicylate based kit can be used, but with caution. Under the conditions of a salicylate kit the ammonia-Prime complex will be broken down eventually giving a false reading of ammonia (same as with other products like Prime&#174, so the key with a salicylate kit is to take the reading right away. However, the best solution is to use our MultiTest: Ammonia™ kit... it uses a gas exchange sensor system which is not affected by the presence of Prime® or other similar products. It also has the added advantage that it can detect the more dangerous free ammonia and distinguish it from total ammonia (which is both the free and ionized forms of ammonia (the ionized form is not toxic)).

Q:I tested my tap water after using Prime and came up with an ammonia reading. Is this because of chloramine? Could you explain how this works in removing chloramine?
A: Prime works by removing chlorine from the water and then binds with ammonia until it can be consumed by your biological filtration (chloramine minus chlorine = ammonia). The bond is not reversible and ammonia is still available for your bacteria to consume. Prime will not halt your cycling process.
I am going to assume that you were using a liquid based reagent test kit (Nessler based, silica). Any type of reducing agent or ammonia binder (dechlorinators, etc) will give you a false positive. You can avoid this by using our Multitest Ammonia kit (not affected by reducing agents) or you can wait to test, Prime dissipates from your system within 24 hours.

http://www.seachem.com/support/FAQs/Prime.html

Οπως και να εχει ομως, καποιοι ελαχιστοι χομπιστες (ιδιως δισκαδες) παρατηρησαν περιεργη συμπεριφορα στα ψαρια τους με το prime.
Μη ξεχναμε οτι ειναι οξειδωτικο στοιχειο (reducer) και επηρεαζει το Redox οπως ολα τα αντιχλωρια που δρουν με τον ιδιο τροπο.
Εγω το χρησιμοποιω χρονια σε ενυδρεια απο αμαζονιο μεχρι χρυσοψαρα και γαριδες χωρις προβλημα

[platy]

ειπαμε οτι μετατρεπει την αμμωνια οχι οτι την εξαφανιζει προς αποφυγη παρεξηγησεων ..χαχα σωστος ο σπυρος παντως

[Nick74]

Προσωπικα μια φορα το χρησιμοποιησα οταν με τις απανωτες διακοπες της ΔΕΗ ειχα παθει ενα ψιλοπροβλημα με την βιολογια σε ενα νεοστρωμενο ενυδρυακι (βεβαια ηδη λογο χαμηλου ph δεν επαιζε θεμα τοξικης αμμωνιας αλλα επειδη η παραμικρη πρασσινιλα στο τεστ με φρικαρει ειπα να το παρω).
Αυτο που εχει ως θετικο ειναι οτι εξουδετερωνει την τοξικοτητα -τωρα με ποιο τροπο το κανει δε γνωριζω, αλλα φανταζομαι πως οντως κατι κανει-
Απο κει και περα σε τακτικη βαση αυτο που χρησιμοποιω ειναι το stress coat της API λογο οτι περιεχει Aloe vera που ως γνωστο εχει πολλες θετικες ιδιοτητες.

[janickrules]

παιδια σας ευχαριστω ολους!
με βοηθησατε σιγουρα!

κι εγω της τετρα χρησιμοποιω μεχρι στιγμης...

[Παναγιώτης Κ]

Και της JBL είναι καλό και έχει και aloe vera. Η αναλογία του είναι 10ml για 40 λίτρα.
Εγώ πάντως έχω και τα 2 και προς το παρόν χρησιμοποιώ το Prime!

[janickrules]